Name | Iron(III) fluoride |
Synonyms | Iron(III) fluoride Iron(Iii) Fluoride, Anhydrous Min |
CAS | 7783-50-8 |
EINECS | 232-002-4 |
Molecular Formula | F2Fe |
Molar Mass | 112.84 |
Density | 3,87 g/cm3 |
Melting Point | 1000 °C |
Water Solubility | Soluble in dilute hydrofluroic acid. Slightly soluble in water. Insoluble in alcohol, ether and benzene. |
Appearance | Powder |
Specific Gravity | 3.87 |
Color | Pale green |
Exposure Limit | ACGIH: TWA 1 mg/m3; TWA 2.5 mg/m3 ;NIOSH: IDLH 250 mg/m3; TWA 1 mg/m3 |
Merck | 14,4022 |
Storage Condition | Room Temprature |
Stability | hygroscopic |
Sensitive | Hygroscopic |
MDL | MFCD00011012 |
Hazard Symbols | C - Corrosive |
Risk Codes | R34 - Causes burns R20/21/22 - Harmful by inhalation, in contact with skin and if swallowed. |
Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection. S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.) S27 - Take off immediately all contaminated clothing. S22 - Do not breathe dust. |
UN IDs | UN 3260 8/PG 2 |
WGK Germany | 3 |
RTECS | NO6865000 |
FLUKA BRAND F CODES | 3 |
TSCA | Yes |
Hazard Note | Corrosive |
Hazard Class | 6.1 |
Packing Group | III |
Ksp precipitation equilibrium constant | pKsp: 5.63 |
category | Corrosive Substances |
Toxicity classification | highly toxic |
acute toxicity | intravenous-mouse LD50: 18 mg/kg |
explosive hazard characteristics | Corrosive |
flammability hazard characteristics | Non-combustible; toxic iron and fluoride fumes are produced on the fire site; |
storage and transportation characteristics | The warehouse is low temperature, ventilated and dry; moisture-proof, sealed and sealed |
fire extinguishing agent | Water, carbon dioxide, dry powder, sand |
occupational standards | TWA 2.5 mg (fluorine)/m3 |
toxic substance data | 7783-50-8(Hazardous Substances Data) |